4.5-Inch Lift Kit with N3 Shocks for 2014-2018 Ram 2500 4WD
- Fits 2014-2018 Ram 2500 4WD Power Wagon — gas engines only, not diesel
- Drilling and cutting required; Rough Country lists an install time of 6-8 hours
- Includes application-valved N3 series shocks, radius arms, front coil springs, rear spacers, pitman arm, and hardware
- Works with rear coil spring and rear air ride trucks; air ride models can set the rear up to 1-inch above the front
- Mega Cab trucks with a two-piece driveshaft and carrier bearing may show take-off vibration
- Downloadable installation guide available. Shipping weight: 241.0 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Diesel models Requires drilling and cutting
ONLY fits 'Power Wagon' models ONLY fits Gas models. On vehicles equipped with a two piece driveshaft and carrier bearing as on the Mega Cab there is the potential for take off vibration depending on the severity Fitment on this page is based on the manufacturer’s application data.
About this kit
4.5-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 39830 is a 4.5-inch lift kit for the 2014-2018 Ram 2500 4WD Power Wagon. It ships with radius arms, lifted front coil springs, rear lift spacers, front and rear track bar brackets, a pitman arm, sway-bar hardware, and application-valved N3 series shocks. Power Wagon gas models only — it does not fit diesel trucks, and installation calls for drilling and cutting.
This 4.5-inch lift kit for the 2014-2018 Ram 2500 4WD covers Power Wagon models with gas engines only; diesel trucks are outside its fitment. The front package uses radius arms with rubber bushings for a closer-to-stock arm angle plus a track bar bracket to keep the axle centered, while the rear side adds spacers, bump stop brackets, sway-bar links, and ride height arms that work with both coil spring and air ride setups. Rough Country lists 6-8 hours for the install, and drilling and cutting are part of the job. Shipping weight: 241.0 lb.
What’s in the box
Kit contents
- 1× Driver Radius Arm 1368996
- 1× FR Box Kit 39830BOX1
- 1× RR Box Kit 39830BOX4
- 1× Powerwagon Shock Kit 39830BOX2
- 1× 5in Diesel 9463
- 1× Passenger Radius Arm 1368997
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 39830 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 39830 |
| UPC / GTIN | 00843030159450 |
| Lift height | 4.5 in |
| Shock package | N3 series |
| Shipping weight | 241 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here