4-Inch Lift Kit with N3 Shocks for 2007–2017 Jeep Wrangler 4WD
- Fits 2007–2017 Jeep Wrangler 4WD two-door models — does not fit four-door models
- Includes N3 shocks, forged adjustable front track bar (2.5-6 inch lift range), X-Flex adjustable arms, and rear coil correction plates
- Rear coil correction plates reset spring angle by 10 degrees; X-Flex arms use greasable rebuildable flex joints
- 2012-2018 applications require exhaust modification for front driveshaft clearance; automatic-equipped Jeeps may need a smaller-diameter driveshaft
- Bolt-on install per the feed facts — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- 4-door models
2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030. On Automatic equipped vehicles due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed. Fitment on this page is based on the manufacturer’s application data.
About this kit
4-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 67330 is a 4-inch lift kit for 2007–2017 Jeep Wrangler 4WD two-door models, packed with N3 shocks, a forged adjustable front track bar, X-Flex adjustable control arms, and rear coil correction plates. It does not fit four-door models. Bolt-on installation with no cutting called out in the feed facts.
This 4-inch lift kit for the 2007–2017 Jeep Wrangler 4WD covers Sport, Sport S, X, Sahara, Rubicon, and the 70th and 75th Anniversary submodels listed in the fitment section. Contents include an N3 shock set, a forged front track bar rated for 2.5-6 inches of lift, an adjustable X-Flex arm kit with 2.5-inch bodies and 1.25-inch threads, and plates that correct rear coil angle by 10 degrees. Four-door models are excluded, and 2012-2018 applications need exhaust modification for front driveshaft clearance. A downloadable Rough Country installation guide is available before you start.
What’s in the box
Kit contents
- 1× 673 Kit Box 673BOX1
- 1× Track Bar 1179$169.95
- 1× Adj Arm Kit Box 1673XBOX3
- 1× Kit Box 1673XBOX4
- 1× N3 Shock Box 681BOX2
Priced components are sold separately here, so a worn shock or arm can be replaced on its own later.
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 67330 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 67330 |
| UPC / GTIN | 00843030171230 |
| Lift height | 4 in |
| Shock package | N3 series |
| Shipping weight | 186.48 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
The fitment-first store
Keep looking
More Lift Kits
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
4 Inch
3.5 Inch
3.5 Inch
3.5 Inch
3.5 Inch
4 Inch