4-Inch Lift Kit with M1 Shocks for 2007–2017 Jeep Wrangler 4WD
- Fits 2007–2017 Jeep Wrangler 4WD two-door models — does not fit four-door models
- 2012-2018 applications call for exhaust modification to clear the front driveshaft (SKU 1030)
- Automatic-equipped Jeeps may see front driveshaft-to-transmission-pan contact under heavy articulation with links disconnected; a smaller-diameter shaft
- Kit contents: forged adjustable front track bar (2.5-6 inch lift), X-Flex control arms, rear coil correction plates, and two M1 monotube shock pairs
- Bolt-on install, no cutting — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- 4-door models
2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030. On Automatic equipped vehicles due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed. Fitment on this page is based on the manufacturer’s application data.
About this kit
4-Inch Lift Kit with M1 Shocks, fitment-checked
Rough Country 67340 is a 4-inch lift kit for 2007–2017 Jeep Wrangler 4WD two-door models, built around two pairs of M1 monotube shocks, a forged adjustable front track bar, X-Flex control arms, and rear coil correction plates. It does not fit four-door Wrangler Unlimited models. Shipping weight: 185.3 lb.
This 4-inch lift kit for the 2007–2017 Jeep Wrangler 4WD covers Sport, Sport S, X, Sahara, Rubicon, and the 70th and 75th Anniversary trims listed in the fitment section, in two-door form only. The box pairs M1 monotube shocks front and rear with X-Flex control arms on 2.5-inch bodies with 1.25-inch threads, greasable rebuildable flex joints, a forged front track bar rated for 2.5-6 inches of lift, and rear coil correction plates that reset spring angle by 10 degrees. Bolt-on installation with no cutting; a downloadable Rough Country installation guide is available.
What’s in the box
Kit contents
- 1× Track Bar 1179
- 1× Adj Arm Kit Box 1673XBOX3
- 1× Kit Box 1673XBOX4
- 1× 673 Kit Box 673BOX1
- 1× M1 MONOTUBE SHOCK PAIR 770740P
- 1× M1 MONOTUBE SHOCK PAIR 770750P
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 67340 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 67340 |
| UPC / GTIN | 00840269918568 |
| Lift height | 4 in |
| Shock package | M1 series |
| Shipping weight | 185.3 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here