5-Inch Radius Arm Lift Kit with N3 Shocks for Ram 3500 Dually
- Fits 2019-2024 Ram 3500 4WD diesel dual-rear-wheel trucks: SLT through Limited Longhorn
- Radius arms with rubber bushings plus a front track bar bracket to keep the axle centered
- Application-valved N3 shocks front and rear
- Transfer case must be removed to install the clocking ring; minor cutting required
- Does not fit Power Wagon, air ride, or 6.7L HO Turbo Diesel with 6-speed Aisin transmission
- Downloadable installation guide available. Shipping weight: 279.25 lb
Will it fit your truck?
✓ Fits
✕ Does not fit
- 'Power Wagon' models Does NOT fit air ride models Rear wheels may require additional dually wheel spacers to run 12.50in wide tire ONLY fits Diesel models Requires minor cutting
- Models with 6.7L HO Turbo Diesel with 6-speed Aisin Transmission
Requires removal of Transfer case for clocking ring install for correct front driveline geometry. On vehicles equipped with a two piece driveshaft and carrier bearing as on the Mega Cab there is the potential for take off vibration depending on the severity this can be corrected with shimming down the carrier bearing. Fitment on this page is based on the manufacturer’s application data.
5-Inch Radius Arm Lift Kit with N3 Shocks, fitment-checked
A 5-inch radius arm lift for 2019-2024 Ram 3500 dual-rear-wheel diesel trucks in 4WD (Rough Country 37530). The kit includes a transfer case clocking ring, so the transfer case comes out during the install to set correct front driveline geometry. N3 shocks and a front track bar bracket are included. Minor cutting is required. Not for Power Wagon, air ride, or 6.7L HO Turbo Diesel trucks with the 6-speed Aisin transmission.
This 5-inch kit is the dual-rear-wheel answer for 2019-2024 Ram 3500 diesel 4WD trucks. Radius arms with rubber bushings hold a near-factory arm angle, a track bar bracket keeps the front axle centered, and application-valved N3 shocks handle damping on and off pavement. Plan the job realistically: the transfer case has to come out so the supplied clocking ring can set correct front driveline geometry, and minor cutting is part of the work. Rear wheels may need dually spacers to run a 12.50in wide tire. Power Wagon, air ride, and 6.7L HO Turbo Diesel trucks with the 6-speed Aisin transmission are excluded. Downloadable installation guide available. Shipping weight: 279.25 lb.
Kit contents
- 1× Driver Radius Arm 1368996
- 1× Drw Box Kit 37530BOX1
- 1× Drw Shock Kit 37530BOX2
- 1× 5in Diesel 9463
- 1× DODGE 2019 RAM 3500 DRW TRANSFER CASE/CLOCKING RING BOX KIT 37530BOX4
- 1× Passenger Radius Arm 1368997
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 37530 kit fits the vehicles shown in the fitment section above.
Specifications
| Brand | Rough Country |
| Part number | 37530 |
| UPC / GTIN | 00843030185800 |
| Shock package | N3 series |
| Shipping weight | 279.25 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
More Lift Kits
5 Inch
5 Inch
5 Inch
5 Inch
5 Inch
5 Inch
5 Inch
5 Inch
5 Inch
5 Inch
5 Inch
5 Inch
6 Inch
6 Inch