5-Inch Lift Kit with N3 Shocks for 2013–2015 Ram 3500 4WD
- Fits 2013–2015 Ram 3500 4WD — does not fit dually, Power Wagon, or rear air suspension trucks
- Application-valved N3 series shocks front and rear for on- and off-road balance
- Front: coil spring spacers, radius arm drop brackets, track bar bracket, sway-bar brackets, pitman arm, hardware
- Rear: 4in fabricated lift blocks, U-bolts, hardware
- Minor drilling and cutting required; install time listed at 6-8 hours with a downloadable installation guide available
- Two-piece driveshaft and carrier bearing trucks such as the Mega Cab may see take-off vibration, correctable by shimming the carrier bearing down
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Dually models
- "Power Wagon" models
- Models with rear air suspension
Requires minor drilling and cutting. Models equipped with factory rear overload springs will need to remove the overload spring On vehicles equipped with a two piece driveshaft and carrier bearing as on the Mega Cab there is the potential for take off vibration depending on the severity this can be corrected with shimming down the carrier bearing. Fitment on this page is based on the manufacturer’s application data.
About this kit
5-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 35620 is a 5-inch lift kit for the 2013–2015 Ram 3500 4WD, built around N3 series shocks, front radius arm drop brackets, and fabricated rear lift blocks. It does not fit dually trucks, Power Wagon models, or trucks with rear air suspension, and minor drilling and cutting is part of the job.
This 5-inch lift kit for the 2013–2015 Ram 3500 4WD covers ST, SLT, Tradesman, Lone Star, Big Horn, Laramie, Laramie Longhorn, and Laramie Limited trims in the fitment section. The front half uses coil spring spacers with radius arm drop brackets, a track bar bracket to keep the axle centered, sway-bar brackets, and a pitman arm; the rear runs 4in fabricated lift blocks with U-bolts. Factory progressive rate coil springs stay in place. Trucks with factory rear overload springs need the overload spring removed. Rough Country lists install time at 6-8 hours, and a downloadable installation guide is available.
What’s in the box
Kit contents
- 1× 5in N3 Shock Box 136930
- 1× 3 4 Blck Ubolts 6599
- 1× FR Radius Arm Drop Box Kit 1357BOX1
- 1× Pitman Arm 6615
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 35620 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 35620 |
| UPC / GTIN | 00843030125134 |
| Lift height | 5 in |
| Shock package | N3 series |
| Shipping weight | 138 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here